|QT25B 1/4" Skid Steer Loader Quick Attach Mount Plate (SKU: QT25B)|
|QT375A 3/8" Skid Steer Loader Quick Attach Mount Plate (SKU: QT375A)|
|Rebar Cap- 3/4" Plastic Rebar End Cap 2" Top. Diameter (SKU: CS075)|
|Rebar Cap-Large Plastic Rebar End Cap 2.5" Outside Diameter (SKU: CS150)|
|Rebar Chair - Utility Chair 2.25" & 3.25" Rebar #3, 4, 5 (SKU: SU000)The Utility Chair / Dolbe will reinforce and raise your rebar off the ground or foundation. They are used in foundation slabs and poured-in-place. This Utility Chair can be used in tilt up and slab work. Our Utility Chair is stable, light, economical, and designed with a 2-1/8" round base for the SU225 and SU325. This Chair is made of plastic, non-corresive material. Quantities vary.|
|Rebar Chair or Wire Mesh - Pyramid Chair 3.5" (SKU: SP000)Pyramid Chairs are used for locking and reinforcing mesh, and #3 and #4 rebar in place with an expandable clip that snaps securely in place. The Pyramid Chair / Dolbe is ideal for foundation slabs poured-in-place. Universal Dolbe Application. This chair can be used in tilt up and slab work. This Chair is stable, economical, and designed with a 2 1/4" round base. Its fastening system is strong and versatile. This chair comes in 3.5", Coverage. Quantities vary.|
|Rebar Chair or Wire Mesh - Q-Decking .75" & 1" (SKU: SE000)The Q-Decking Chair is designed for concrete decks, roofs, beams, prefabricated and concrete finish. This chair / dolbe features a vertical spacer, it's stable and economical, and the base has little contact space. Our Q-Decking Chair has a strong and versatile subjection system. Reinforcing mesh and rods up to #3 rebar / rerod. Available in .75" and 1" coverage. Click into this product to see the dimensions.|
|Rebar Spacer Wheel & Wire Mesh - Plastic .75", 1", 1.25', 2", 2.5", & 3" (SKU: DS000)Plastic Spacer Wheel (Sizes .75" to 3.0"). NOTE: The Wheel can be used for walls, columns, beams, cast-in-place and prefabrication. The Spacer Wheel has a double fastener that works well for welded mesh and for rebar, maintaining them to the center of the spacer. This lateral spacer is strong and light with minimal surface contact. Size is determined by Rebar Clearance - not the diameter of the wheel. Quantities vary. Click to see the outside dimensions of each size wheel.|
|Rebar/Rerod Cap - OSHA HH-M Safety Caps 4"x4" Top (SKU: HH-M)OSHA approved rebar safety caps are meant to prevent injury. Using this OSHA safety cap is a sure sign that a work site is taking proper precautions for a person's protection. Fits rebar #7-#11. Bright yellow for visibility. OSHA Approved caps. There are 25 caps per box. The top of this cap measures 4" x 4".|
|Slab Bolster FTP 2.5" (SKU: SB000)The Slab Bolster is a 30" very strong spacer that can be extended to longer lengths through its locking system. Allow minimum point of surface contact with form. The Slab Bolster is environmentally friendly, "Green", made of recycled plastics. These come in 30" pieces. Available in 2.5" sizes. Price based per foot.|
|Wire Mesh Chair - Arc Mesh Chair .70" (SKU: SA000)Arc Mesh Chair is an innovative vertical spacer for welded mesh, and decorative concrete, very economical. This Chair is used for any compression slabs between 1.25" and 2.5" thick. This also includes mezzanines with joist-deck or polystyrene block. The Arch Mesh Chair is flexible and strong at the same time, which represents unique advantage. Mesh chair up to .25" diameter. Available is .70" coverage. 500 pieces per bag.|
|Wire Mesh Chair 3" (SKU: SM000)The Mesh Chair is used for welded mesh in reinforcing decorative concrete slabs. This Mesh Chair features a verticle spacer, economic and versatile. The circular base will provide stability and support designed for foundations. For an ideal installation, the Mesh Chair should be installed in the four way crossing. These chairs are available in 1", and 3" coverage. The base size for the 3" chair is 3.5" wide. Mesh and rods for .25", #2 rebar. Available in 100 pc. bags.|
|Z - Universal Receiver Plate 2" Heavy Duty Quick Attach Plate Skid Loader (SKU: QTRP2)
Heavy Duty Steel, Quick attach plate is made from 1/4" Steel with a 3/8" Top Bar
2" Receiver Hole (Ball Hitch NOT INLCUDED)
Compatible with skidloaders that have the universal quick attach system including Bobcat, Case, ASV, Gehl, John Deere, New Holland, Caterpillar, and more!
The possibilities are endless with the Universal Receiver Plate. Use your skidloader to move a trailer or farm equipment.
Product will ship with UPS Ground.
|Z -5/16" Haala Industries Skid Steer Loader Quick Attach Mount Plate (SKU: QT)5/16" Thick Plate with 3/8" Top Bar 1/4" Thick Plate with 3/8" Top Bar Will fit Bobcat, Case, ASV, Gehl, John Deere, New Holland, Caterpillar and more! Comes bent and welded, ready to weld onto your bucket, forks, tree spade, backhoe, wood splitter etc!!!! Cut with a CNC High Definition Plasma Table for Ultimate Precision!|