| • |
 This Bar Clip is a clip-on spacer that accommodates a larger range of rebar diameters. Its heavy duty design easily supports extra loads. The Bar Span Clip comes in two different sizes (1", & 2") and in 500 pc. boxes. The 1" clip has max bar of #1-#5, and the 2" clip has max bar of #1-#9. Click to see the dimensions of this product. |
More info ›› |
| |
| • |
 Skate is to be used as a sand pad for added stability. The Arc Chair Skate prevents sinking and mispositioning of welded mesh. The Skate provides a firm base on low-compacted, smooth surfaces or polystyrene block. The Arc Chair Skate is designed to be assembled with the Arc Chair. Skate only, chair is not included. This skate has a .4" coverage and is available in 500 piece bags. Max rebar #1. The dimensions are 1" x 4". |
More info ›› |
| |
| • |
 Arc Mesh Chair is an innovative vertical spacer for welded mesh, very economical. This Chair is used for any compression slabs between 1.25" and 2.5" thick. This also includes mezzanines with joist-deck or polystyrene block. The Arch Mesh Chair is flexible and strong at the same time, which represents unique advantage. Mesh chair up to .25" diameter. Available is .70" and 1." coverage. 500 pieces per bag. |
More info ›› |
| |
| • |
 The DC Chair allows for the positioning of horizontal reinforcement. The design allows for easy flow of concrete for maximum bond. The DC chair has two different sizes; 1.5" and 2" coverage. The base of the DC150 base measures 1 1/2" x 1 1/8" and the DC200 base measures 1 5/8" x 1 1/8". The Max rebar for this chair is #6. 500 piece boxes available. |
More info ›› |
| |
| • |
 HD Paving Chair is used in on-grade construction for slab work.Its high strength and stable design makes this the spacer of choice for quality construction. Universal Dolbe Application. Max rebar / rerod size #13. This chair comes in 2", 2.5", 3", 3.5", 4", 4.5", 5" and 5.5" coverage. Quantities vary. Click into this item to see base sizes. |
More info ›› |
| |
| • |
 HDB Paving Chair is used in on-grade construction for slab work. Its high strength and stable design makes this the spacer of choice for quality construction. Has base for a added stability. Max rebar size #13. This chair comes in 2", 2.5", 3", 3.5", 4", 4.5", 5", and 5.5" coverage. Quantities vary. Click into this item to view base sizes. |
More info ›› |
| |
| • |
 Intersection chairs have a 1 1/2" coverage with a 3" wide base. This chair can hold up to two #5 bars within a locking intersection. The Intersection Chair is a chair where you can raise and secure your rebar all in one step. This chair / dolbe is compatible with #2, #3, #4 and #5 rebar. (1/4", 3/8", 1/2", 5/8"). Universal Dolbe Application. It can also be used in post tension applications. |
More info ›› |
| |
| • |
 The Mesh Chair is used for welded mesh in reinforcing concrete slabs. This Mesh Chair features a verticle spacer, economic and versatile. The circular base will provide stability and support designed for foundations. For an ideal installation, the Mesh Chair should be installed in the four way crossing. These chairs are available in 1", and 3" coverage. The base size for the 3" chair is 3.5" wide. Mesh and rods for .25", #2 rebar. Available in 100 pc. bags. |
More info ›› |
| |
| • |
 Pyramid Chairs are used for locking and reinforcing mesh, and #3 and #4 rebar in place with an expandable clip that snaps securely in place. The Pyramid Chair / Dolbe is ideal for foundation slabs poured-in-place. Universal Dolbe Application. This chair can be used in tilt up and slab work. This Chair is stable, economical, and designed with a 2 1/4" round base. Its fastening system is strong and versatile. This chair comes in 1.25", 2", 2.5", 3", 3.5", and 4.5" Coverage. Quantities vary. |
More info ›› |
| |
| • |
 The Q-Decking Chair is designed for concrete decks, roofs, beams, prefabricated and concrete finish. This chair / dolbe features a vertical spacer, it's stable and economical, and the base has little contact space. Our Q-Decking Chair has a strong and versatile subjection system. Reinforcing mesh and rods up to #4 rebar / rerod. Available in .75", 1", and 2.5" coverage. Click into this product to see the dimensions. |
More info ›› |
| |
| • |
 SF-Chairs are multi-purposed, suggested for reinforcing rods for all kinds of slabs, beams, and casts concrete on site. Universal Dolbe Application. Features of the SF-Chair / Dolbe include: strong, stable and economic, and its wide base provides great stability and support. Rebar/ Rerod sizes #1, #2, #3, and #4. Variable height .75" & 1" (Just Rotate) Mesh and rods up to #4 rebar. The SF-Chair comes in 100 piece bags. Base size is 1-5/8". |
More info ›› |
| |
| • |
 The Utility Chair / Dolbe will reinforce and raise your rebar off the ground or foundation. They are used in foundation slabs and poured-in-place. This Utility Chair can be used in tilt up and slab work. Our Utility Chair is stable, light, economical, and designed with a 2-1/8" round base for the SU225 and SU325 and 2-1/2" x 2-1/2" square base for the SU300, SU400, SU450, SU500, SU550, and SU600. This Chair is made of plastic, non-corresive material. Quantities vary. |
More info ›› |
| |
| • |
 The 4 Leg H-Chair is suggested for all kinds of concrete slabs, on site casting, prefabricatd, tilt ups, post tensions and concrete finish. The H Chair features a vertical spacer with unbeatable design, very strong and stable, due that in the same axel has two points of bar support. Our H-Chair is ideal for heavy structures, maximum aggregate flow and concrete consolidation. Reinforce #1 - #12 Rebar, Rerod. Sizes available are 1", 1.5", 2", 2.5", 3", 3.5", and 4". Click to see dimensions. |
More info ›› |
| |
| • |
 This 6 Leg H-Chair is suggested for all kinds of concrete slabs, on site casting, prefabricated, tilt ups, post tensions and concrete finish. Our 6 Leg H-Chair features a vertical spacer with unbeatable design, very strong and stable, due that in the same axel has two points of bar support. This H-Chair is ideal for heavy structures and concrete consolidation. Reinforce #1 - #12 Rebar. Availble in sizes 1.5", 2", 2.5", 3", 3.5", 4", 4.5", 5", 5.5", and 6". Click to see dimensions. |
More info ›› |
| |
| • |
 We offer the only wheel chair that locks in place and accommodates more than 1 size rebar. Locking wheels can be used in both horizontal and vertical applications. The Locking Wheel has a patented locking latch that reinforces the rebar to stay in place. The Locking Wheel is available in 1", 1.5", 2", and 3" sizes. Quantities vary. |
More info ›› |
| |
| • |
 Plastic Spacer Wheel (Sizes .75" to 3.0"). NOTE: The Wheel can be used for walls, columns, beams, cast-in-place and prefabrication. The Spacer Wheel has a double fastener that works well for welded mesh and for rebar, maintaining them to the center of the spacer. This lateral spacer is strong and light with minimal surface contact. Size is determined by Rebar Clearance - not the diameter of the wheel. Quantities vary. Click to see the outside dimensions of each size wheel. |
More info ›› |
| |
| • |
 Quick snap lock allows for easy application. It can be used for multiple purposes such as walls, columns, beams cast-in-place and prefabricated. The Snap On Wheel has minimal surface contact. Made of durable plastic, non-corressive. This Large Channel Snap On Wheel has the advantage of being a smaller wheel, but takes on a bigger rebar. PL3052 is 1" Wheel Snap On for #3 Max Rebar. PLLC3052 is 1" Large Channel Wheel, Snap On for #6 Max Rebar. Click to see the outside dimensions. |
More info ›› |
| |
| • |
 OSHA approved rebar safety caps are meant to prevent injury. Using this OSHA safety cap is a sure sign that a work site is taking proper precautions for a persons protection. Fits rebar #3-#7, (3/8" - 7/8"). Bright orange for visibility. OSHA Approved cap. These caps come in 25 piece boxes. The top of this cap measures 4" x 4". |
More info ›› |
| |
| • |
 OSHA approved rebar safety caps are meant to prevent injury. Using this OSHA safety cap is a sure sign that a work site is taking proper precautions for a person's protection. Fits rebar #7-#11. Bright yellow for visibility. OSHA Approved caps. There are 25 caps per box. The top of this cap measures 4" x 4". |
More info ›› |
| |
| • |
 Plastic Rebar End Caps are durable, highly visible, and provide scratch protection for on the job safety. Easy to install. Plastic Rebar End Caps fit rebar / rerod sizes #3, #4, #5, #6, #7. (3/8", 1/2", 5/8", 3/4", 7/8"). The end cap's bright orange color makes them very visible. The Outside Dimension of the top of this cap is 2.5". Available in 50 & 400 piece bags. |
More info ›› |
| |
| • |
 40" long gun for mat applications and 27" short gun for vertical applications. The JiffySHOT Applicator Gun has been designed to work in conjunction with the TiClip. This is a product that will allow the user to stand while securing rebar intersections. Using the TiClip and JiffySHOT combo eliminates the need to bend over and tie wire. No more backaches from bending over all day. The best part is you will also be reducing the labor time required to secure your rebar by up to 80 percent! |
More info ›› |
| |
| • |
 The Jiffy Clip TiClip is an innovative product designed to make securing rebar a snap. The TiClip can be used on crosses, nineties and parallels. The quick and easy snap-on installation reduces time and labor by up to 80%. TiClips are easily installed. The Jiffy TiClip can also be used when installing infloor heat by securing the pex tubing to the rebar. There are three different clips: max bar #3, #4, and #5. Quantities vary. |
More info ›› |
| |
| • |
 With one step you can raise and secure your rebar or PT cable. Strong and lightweight; the Jiffy Clip TiChair's quick and easy snap-on installation limits the potential of dislodging and the polymer based chairs minimize damage to underlying surfaces. The Jiffy TiChair can also be used when installing infloor heat by raising the pex tubing and rebar off the ground. The TiChair has a 3" round base. These chairs have coverages of 1.5" and 2" or 2.5" and 3" with max bars of #3, #4, and #5. Qua |
More info ›› |
| |
| • |
 Make connections faster, move-on to the next job quicker with the patented Kodi Klip Systems. Current rebar connections are extremely labor intensive and very slow. It will change the way you do your rebar business.
The Kodi Klip System gives you a faster, safer and better way to make rebar connections. Instead of time-consuming wire ties or expensive welds, the Kodi Klip System can make the majority of the connections in your pre-cast or pre-stressed production process. Klips are great in f |
More info ›› |
| |
| • |
 5' Lengths . Heights available from 2" and up. Legs are spaced 8" O.C. Used to support and space the top mat of steel off the form. |
More info ›› |
| |
| • |
 5' Lengths. Heights available from 2" and up. Legs are spaced 8" O.C. May also be used on firm fill. Used to support and space the top mat of steel off the bottom mat. |
More info ›› |
| |
| • |
 Heights available from 2" and up. Used to support and space the top mat of steel from the form. |
More info ›› |
| |
| • |
 5' Lengths. Heights available up to 3". Legs are spaced 5" O.C. Used to support and space the bottom steel off the form. |
More info ›› |
| |
| • |
 5' Lengths. Heights available up to 6". Legs are spaced 5" O.C. May also be used on firm fill. Used to support and space the top mat of steel from the bottom mat. |
More info ›› |
| |
| • |
 Panel Tie Stakes are anchors for insulating foam in wall panels. The tie stake reduces heat transmission caused by galvanized or stainless steel hairpin anchor. The stake is 5-5/8" long and comes in a 500 piece box. |
More info ›› |
| |
| • |
 Pocket Formers create a recess in concrete to form a handle for lifting concrete structures. The size of the Small Pocket Former measures 1-1/2" x 6" x 2-1/2". |
More info ›› |
| |
| • |
 Pocket Formers create a recess in concrete to form a handle for lifting concrete structures. The size of the Moby Dick Pocket Former measures 1-1/2" Wide x 2-1/2" Deep. |
More info ›› |
| |
| • |
 The Slab Bolster is a 30" very strong spacer that can be extended to longer lengths through its locking system. Allow minimum point of surface contact with form. The Slab Bolster is environmentally friendly, "Green", made of recycled plastics. These come in 30" pieces. Available in .75", 1", 1.25", 1.5", 1.75", 2", 2.25", 2.5", 2.75" and 3" sizes. Price based per foot. |
More info ›› |
| |
| • |
 The Slab Bolster allows you more flexibility when stacking rebar and the connection points are designed to eliminate possible separation or buckling. This Slab Bolster can be stacked into a multi-level configuration, meeting specifc height requirements and multiple rebar / rerod levels. The Slab Bolster is ideal for pouring precast, garage parking decks, tilt walls, and other structures that require additional rebar reinforcement. Available in 20" pieces. Sizes 1", 1.5", 2", 2.5", and 3". |
More info ›› |
| |
| • |
 The dimensions of the bike rack are as follows:
9" Tall
25" Wide
61" Long.
Please note that these are approximate. |
More info ›› |
| |
| • |
 The dimensions for the park bench are as follows:
18.5" Tall
20.5" Wide
48" Long.
Park Benches can be personalized! |
More info ›› |
| |
| • |
 5/16" Thick Plate with 3/8" Top Bar
1/4" Thick Plate with 3/8" Top Bar
Will fit Bobcat, Case, ASV, Gehl, John Deere, New Holland, Caterpillar and more!
Comes bent and welded, ready to weld onto your bucket, forks, tree spade, backhoe, wood splitter etc!!!!
Cut with a CNC High Definition Plasma Table for Ultimate Precision! |
More info ›› |
| |
| • |
 The Turkey Vaccinating Machine Conveyor is a multi-purpose machine equipped with a flat conveyor belt for the body and a cleated belt to hold the legs. This system eliminates labor hours and allows the producer the capabiltiy to perform multiple functions such as vaccinating and de-beaking. With this machine you can vaccinate at a rate of 1600-1800 birds per hour! The unique design allows one person to do the catching that would take the work of three or more. |
More info ›› |
| |
